MAIN FEATURES

Smart remote control (RMT/RJ 11 or RJ45)

Battery temperature sensor (BTS)

Automatic generator starting (AGS)

Designed to operate under harsh environment

DC start & automatic self-diagnostic function

Compatible with both linear & non-linear load

Easy to install & easy to operate & easy to solve

Low DC voltage supports home & office appliances

Powerful charge rate up to 120Amp, selectable from 0%-100%

High efficiency design & “Power Saving Mode” to conserve energy

Battery priority mode, designates inverter-preferred UPS configuration

8 pre-set battery type selector plus de-sulphation for totally flat batteries

4-step intelligent battery charging, PFC (power factor correction) for charger

8ms typical transfer time between utility & battery, guarantees power continuity

15s delay before transfer when AC resumes, protection for load when used with generator

TECHNICAL SPECIFICATIONS

2KW X SERIES TECHNICAL SPECIFICATIONS

General

Model: Bersh X series.

Rated Power: 2000 W.

Input

Voltage: 180 – 300 VAC.

Frequency Range: 47 Hz/55 Hz (Auto sensing).

Output

AC Voltage Regulation (Batt. Mode): 220/230/240VAC ± 10%.

Surge Power: 6000VA.

Efficiency (Peak): 88%.

Transfer Time

Less than 10ms

Waveform

Pure sine wave.

TDH

Less than 3%(Rated battery level, rated full linear load)

Battery & AC Charger

Battery Voltage: 24VDC

Overcharge Protection: 33 VDC.

Maximum AC Charge Current: 35 A.

Battery Selector

Cooling

Force Air

Physical

Dimension, L x W X H (mm): 550 x 415 x 310.

Net Weight (kgs): 11.4.

Operating Environment

Humidity: 0 to 95% Relative Humidity(Non-condensing).

Operating Temperature: -10°C to 40°C.

Storage Temperature:     -40°C to 70°C